Below is a list of articles pertaining to Iron & Steel at Hatch which have been published in journals and/or conference proceedings.
Comparing the Accuracy of Acousto Ultrasonic-Echo (NDT), Finite Element Analysis (FEA), and Drilling When Obtaining a Blast Furnace Refractory Lining Wear Profile
Authors: A. Sadri, P. Marinelli, E. Doro, P. Gebski and A. Rampersad
Association for Iron & Steel Technology (AISTech 2009) Conference, May 4 - 7, 2009
Abstract
The Successful Piloting of CRISP, The Innovative Continuous Steelmkaing Technology
Authors: F. Wheeler, Y. Gordon, S. Broek, I. Cameron
2009 Conference on Innovation in EAF and in Steelmaking Processes, May, 2009
Abstract
Comparison of By-Product and Heat-recovery Cokemaking Technologies
Authors: P. Towsey, R. Pereira, I. Cameron, I. Gordon
Brazilian Association of Metals, Raw Materials and Mining, 39th Ironmaking And Raw Materials Seminar, 10th Brazilian Symposium On Iron Ore, Ouro Preto, MG, Brazil, November 22 - 26, 2009
Abstract
Steel Plant Capital Expansion Planning at Severstal N.A., Dearborn via Dynamic Computer Simulation
Authors: J.T. McGinty, Hatch; T.A. Obrecht, Severstal N.A., Dearborn
AISTech 2009 - The Iron & Steel Technology Conference and Exposition, May 5, 2009
Abstract
Towards Energy Efficient Iron and Steelmaking - The Greenhouse Gas Carbon Abatement Process (G-Cap)
Authors: M. Freislich, S. Kumar, S. Gale and P. Duncan
International Convention on Clean, Green and Sustainable Technologies in Iron and Steelmaking, Bhubaneshwar, India, July 15, 2009
Abstract
Port and Rail Infrastructure Expansion Planning at ArcelorMittal Mines Canada via Dynamic Computer Simulation
Authors: J.T. McGinty, Hatch; C. Chaves, Hatch; P. Navarra, ArcelorMittal Mines Canada
39th Ironmaking and Raw Materials Seminar and 10th Brazilian Symposium on Iron Ore, November 23, 2009
Abstract
Design Integration of Pot Equipment to Produce World Class Results with Simplified Operation
Author: O. Pearcey
APGalva09 The Asia-Pacific Galvanizing Conference 2009, Korea, November 8 - 12, 2009
Abstract
Methodology and Results of Ironmaking Technology Selection for Specific Site Conditions
Authors: I. Gordon, M. Freislich, J. Els
5th ICSTI'09 International Congress on Science and Technology of Ironmaking, October 19 - 22, 2009
Abstract
Ironmaking Technology Selection for Site Specific Conditions
Authors: I. Gordon, M. Freislich, J. Els, C. Chaves
Recucao de Minerio de Ferro & Tecnologia Mineral 2009, November 22 - 26, 2009
Abstract
Diamond Pass Design for Single Family Bar Rolling
Authors: S.E. Lundberg, M. Allen
AISTech 2009 on May 5, 2009
Abstract
Plate Mill thickness Control Upgrade At Bluescope Steel
Authors: G. Boulton, R. Davies, J. Edwards, K. Hochstetter, P. Thomas (Hatch IAS) and T. Rojas, Bluescope Steel Limited
AISTech Conference, May 2009
Abstract
Key Issues for Effective Shutdown Management when Adopting a Target Cost Estimate Based Contract
Authors: S. Malin, S. Mitchell
Shutdown 2009, Brisbane, Australia, August 2009
Optimization of Production Control Policies in Failure-Prone Homogenous Transfer Lines
Authors: P.Lavoie, J.P. Kenné and A.Gharbi
Production control and combined discrete/continuous simulation modeling in failure-prone transfer line
Authors: P.Lavoie, J.P. Kenné and A.Gharbi
Pilot Testing of the Hatch ContinuousSteelmaking Technology
Authors: F. Wheeler, F. Atkinson, I. Gordon, S. Broek, V. So, M. Barati
Use of Dynamic Computer Simulation for Optimal Meltshop Logistics
Authors: J.T. McGinty, J.D. Young, C.E. Greene & V.C. Kendrick
Greenhouse Gas Carbon Abatement Process
Authors: M.Freislich, S.Gale, P.Duncan, N.McClusky
Successful Blow-In of ESSAR Steel Algoma's Blast Furnace 7
Authors: A. Krasavtsev, K. Quigley, J.B. Hyde, I. Cameron, Hatch Ltd., and L. Jones, D.Vanmarrum, J.Tuomi, D.Dutta, D.Thibodeau, P.Kuuskman, Essar Steel Algoma Inc.
Dynamic Simulation in Iron Ore Pelletizing Plants
Authors: P.Lavoie, P. Navarra, and R. Kuhne (IOC)
CFD Modeling to the Design of Fume Control Systems in the Steel Industry
Authors: T. Plikas, J. Woloshyn and D. Johnson
Canadian Green Steel - Adopting Best Practices
Authors: J.Feldman, E.Smith, S.Gale, D.Clarry
Application of CFD Modeling to the Design of Fume Control Systems in the Steel Industry
Authors: T. Plikas, J. Woloshyn and D. Johnson
Economic Incentives for a Continuous Steelmaking Process
Authors: G. Traquair, F. Wheeler and I. Gordon
Conversion to Partially Open Bath Smelting on Highveld Ironmaking Furnaces
Authors: C. Walker, K. Sutherland, B. Marshall, J.M.A. Geldenhuis, J. Els, N. Voermann and B. Wasmund
Exchange Rates: At the Heart of Steel Industry Woes
Author: D. McLaughlin
Managing the Risk of Implementing New Technologies
Authors: L.C. McLean, C. Twigge-Molecey, F.M. Wheeler
Influence of Non-Uniformity of Material and Gas Distribution on Heat Exchange Regularities in the Iron Blast Furnace
Authors: I. Gordon, N. Spirin, V. Shvidkiy, Y. Yaroshenko
Optimal Control of Cupola Operation
Author: I. Gordon
Dynamics of Transient Heat Transfer Processes in Counter-Current Furnaces and Devices with Packed Layer of Burden Material
Authors: I. Gordon, V. Shvidkiy, Y. Yaroshenko
Dynamic Furnace Controller for Electric Arc Furnaces
Authors: C. Jansen van Rensburg and K. Geldenhuis
Rail Wheel Squeal – Some Causes and a Case Study of Freight-Car Wheel Squeal Reduction
Authors: C.E. Tickell, P. Downing and C.J. Jacobsen
Plant Optimisation
Authors: J. Kwak, J. Leahy and K. Pery
Mitigation of Risks and Profitability of Mining and Metallurgical Projects
Authors: C. Twigge-Molecey and I. Gordon
The SASE Project
Authors: G. Hawkins, G.H. Feldtmann, I. Cameron
Improvement of Heat Treatment in Midrex Furnaces
Author: I. Gordon
Modelling of Iron Flow, Heat Transfer, and Refractory Wear in the Hearth of an Iron Blast Furnace
Authors: P.K. Iwamsasa, G.A. Caffery, D. Warnica, S.R. Alias
Blast Furnace Models to Analyze Raceway Zone Formation and to Predict Lining Life
Authors: I. Gordon , V. Shvidkly, Y. Yaroshenko, N. Spirin, V. Lavrov, D. Shvidkiy
DRI/HBI Production in Shaft Furnaces with Natural Gas Self-Reforming in Metallization Zone
Authors: I. Gordon, M. Blank, M. Prints, B. Bokovikov
Analyzing Casting Problems by the On-line Monitoring of Continuous Casting Mold Temperatures
Authors: P. Hemy, R. Smylie, C. Srinivasan
Electromanetic Methods to Reduce Clogging in Tundish Nozzles
Authors: L. Kadar, J.D. Lavers
A Step Toward Continuous Steelmaking: The Novel Hatch Compact Reduced Iron Steelmaking Process
Authors: F.W. Wheeler, I. Gordon
Dynamic Simulation of Melting Process in Arc Furnaces
Authors: C. Hayman, S. Agarwall, L. Heyd, S. Granstrom
The Effect of Market Demand and Operating Philosophy on the Productivity in a Bar and Wire Rod Mill
Authors: P.A. Munther, J.G. Wheeler
A Study of Friction During Hot Rolling of Steels
Authors: P.A. Munther, J.G. Lendard
Pollution Prevention in the Steel Industry Toward a Zero Waste Plant
Authors: L.M. Wrona, G. Julien
Clean Plant Design 2000 and the Iron and Steel Industry
Authors: T. Cesta, W.J. Thoburn, B.O. Wasmund
Optimization of BOF Air Emission Control Systems
Authors: T. Cesta, L.M. Wrona
Mechanical Redesign of a Shaker Baghouse at Inland Steel
Authors: T. Cesta, B. Lueger, L. Ort
A Structured Approach to Meltshop Fume Control System Upgrade
Authors: P.G.A. Brand, R.W. Manten
Birmingham Steel Corporation's Bar Mill Project Managing Environmental Issues
Authors: H.T. Stuimer, R.C. Smith, L.M. Wrona, R.W. Anderson
Technical Evaluation of Vendor Proposals for Emission Control Systems
Authors: P.G.A. Brand
EAF Emissions Control at AMERISTEEL's Knoxville Division
Authors: R.W. Manten, P.G.A. Brand, J.F. Oliver
Upgrade of Electric Arc Furnace Fume Control System at Nucor Steel Plymouth, Utah
Authors: S. Rowlan, P.G.A. Brand, T. Porretta, J. Romano
Secondary Emission Control at Algoma Steel's No. 2 Basic Oxygen Steel Plant
Authors: C. Moes, G. Rohekar
CRISP– The Novel Hatch Continuous Reduced Iron Steelmaking Process
Authors: F. Wheeler, I. Gordon, J. Wheeler
Latest Development in the Hatch Continuous Steelmaking Process
Authors: F. Wheeler, I. Gordon, J. Wheeler
CRISP– The Novel Hatch Compact Reduced Iron Steelmaking Process
Authors: I. Gordon, J. Wheeler
Optimization of Tuyere Parameters for Natural Gas Injection and Control of Heterogeneity of Blast Furnace Operation
Authors: I. Gordon, V. Lialuk
Optimization of the Design and Operating Parameters of Shaft Furnaces
Authors: I. Gordon, V. Shvidkiy, Y. Yaroshenko
